VB; Zakázková kovovýroba
Poptáváme zakázkovou kovovýrobu.
Hledáme výrobce s trochou tvůrčího myšlení a duchem "dokážu to", aby nám pomohl zhotovit předmět na přiloženém obrázku, pro lodní využití.
Rádi bychom obdrželi nabídku na výrobu tohoto předmětu z výběru vhodných materiálů.
Poptáváme výrobu 10 ks co možná nejdříve, dalších 10 ks v příštích několika měsících a potom 500 ks.
Předmět musí snést vnější tlak 2, 5 MPa (25 bar) a budeme měnit tloušťku stěny podle materiálu.
Máme zájem o hliník, který bychom pak mohli natřít nebo tvrdě anodizovat,
nerezovou ocel 316, titan nebo cokoliv jiného, co budete považovat za vhodné.
Máme váhový rozpočtu - sílu - omezení velikosti a máme určitý prostor pro flexibilitu.
Předmět má průměr asi 500 mm s výškou 200 až 250 mm.
Předmět může být zhotoven v dílech a pak svařen.
Další podrobnosti viz anglický text.
Mohu dodat 3D model po krocích a IGES formáty a mnoho dalšího.
Původní znění:
Inquiry
Dear Sirs,
Can you help us or know someone who can ??.
We have a requirement to make this item for a marine usage.
We would like a quote to make this item from a choice of suitable materials.
We are looking to make 10 as soon as possible, another 10 in the next few months after that and then 500+ thereafter.
The item must with stand 2.5 MPa external pressure (25 bar) and we will alter the wall thickness to suit the material.
We are interested in Aluminium which we could then coat or hard anodise,
316 stainless steel, titanium or anything else you might think suitable.
We have a weight budget – strength – size restraints and have some room for flexibility.
The item is about 500mm in diameter with a height of 200 to 250mm.
The item could be made in sections and then welded together.
I have done some FEA and think that 2mm wall stainless 316 will do the job.
We can obtain some oval tube sections for the chambers, these can then be machines – linished to get the cutouts.
There are a number of possibilities and thoughts on how this item could be made, from tube forming and welding, part casting and then welding, Carbon Fibre, Hydro-forming.
We are looking for a manufacturer with a bit of creative thinking and some “can do” spirit to help us make this item.
The issue is with the forming of the 3D tube quadrants. When these have been made they can also be machined to get the mouths – cut outs then to meet and fit onto the chambers.
A welding jig can be designed and fabricated to allow welding to be easier and also to get shape consistency.
I can supply the model in 3D in step, and IGES formats and many more.
Please let me know your thoughts.
With best regards,
Peter Remmert
GO Science Ltd
Unit 5
Redhill Farm Business Park
Elberton
Bristol
BS35 4AL
(lab) +44 (0)1454 419600
(e) peter.remmert@goscience.co.uk
(w) www.goscience.co.uk
This email is intended only for the original recipient or entities identified above, and may include information of a sensitive or confidential nature which should not be subject to further disclosure.
If you are not the designated recipient then please delete this message and its copies immediately. Further transmission or distribution of this message is strictly prohibited.
Máte-li zájem o nejnovější poptávky a další nadstandardní služby, staňte se
klientem Evropské databanky